Advertisment:

Author Topic: Problems connecting remotely to Foscam FI9851P  (Read 492 times)

Offline Garthak

  • Newbie
  • *
  • Posts: 1
    • View Profile
Problems connecting remotely to Foscam FI9851P
« on: May 22, 2016, 02:12:33 pm »
I have 4  foscam cameras 2x FI9851P and 2x FI9851P. I can connect to the 2 FI9851P with no problems. I can only access the 2 FI8919W when on the same wifi network. I have tried fascam support and got nothing.  Also I can not connect to the same 2 cameras with the app at all. I'm at a total loss. I have latest firmware, DDNS is setup and says it was a success. I have set IP addresses at the cameras and my port is open.

Offline TheUberOverLord

  • Full Member
  • ***
  • Posts: 167
    • View Profile
    • Free IP Camera Software
Re: Problems connecting remotely to Foscam FI9851P
« Reply #1 on: July 01, 2016, 01:44:00 pm »
I have 4  foscam cameras 2x FI9851P and 2x FI9851P. I can connect to the 2 FI9851P with no problems. I can only access the 2 FI8919W when on the same wifi network. I have tried fascam support and got nothing.  Also I can not connect to the same 2 cameras with the app at all. I'm at a total loss. I have latest firmware, DDNS is setup and says it was a success. I have set IP addresses at the cameras and my port is open.

Quote from: Pedro Carvalho
I need help with configuration of static ip adress.
My network is 10.1.1.1 with SM: 255.255.0.0
I try to configure adress 10.1.5.100 and because my DG is 10.1.1.254 i get error that DG is not in the same network.

Please make sure that you have the most current firmware for your camera model installed:

http://www.foscam.com/download-center/firmware-downloads.html

Also, please see this it has the most stable configuration settings for ALL Foscam camera models:

http://foscam.us/forum/post15934.html#p15934

Don

 

    Advertisment:

Mobile Theme